Pick any tank. See every reading, every hold point and every signature.
Coating and corrosion QA for shipyards, offshore platforms, refineries, chemical plants and any site with a coatings programme. The inspector records it at the steel, with or without signal. The office runs the job from the same record. The report prints the way your customer asked for it.
Survey · Grade · Workpack
Execution QA · Audit trail
Web · iPad · iPhone
01 / 12
Brief the crew
SupervisorStart today's JSA from yesterday's plan or from the coatings template, then change what's different today. Any row can be edited, removed or added.
Sheet 02Lifecycle
One record, from the first survey to the last signature.
Most tools handle one stage and hand you an export for the next. Here the survey, the workpack, the inspection and the sign-off are the same record, tied to the same piece of steel.
01 · Survey
Grade the steel
Walk the site, grade each element against ASTM D610, mark it red, yellow or green, and measure its coatable area.
02 · TriageDecide what's first
The office reviews the calls. Amend a grade and the surveyor's original stays on the record beside it.
03 · WorkpackScope and price it
Turn the items into a workpack, price it from your own rate card, issue it, and revise it by number.
04 · Execution QAInspect every coat
Prep, ambient, application, DFT and post-cure at each hold point, checked against the contract spec as it's entered.
05 · Audit trailAnswer for it later
Server-stamped sign-offs, reports frozen when issued, and a record that still explains itself years on.
Sheet 03Compare
Gauge apps record. Form apps collect. This one checks, and carries the job.
We read the public product pages of the tools a yard or plant would weigh against this one. By category, this is what each is built to do.
| Job to be done | LogiInspect AI | Gauge software | Form & checklist apps | Integrity platforms |
|---|---|---|---|---|
| Readings from the gaugeTyped into a template, or wall-thickness data only | ● | ● | ◐ | ◐ |
| Checked against the contract spec while you captureRange checks only where someone built them into a form | ● | — | ◐ | — |
| Condition survey: grade, defects, measured areaIntegrity tools grade in-service condition, not coating area | ● | — | ◐ | ◐ |
| Hold points with dated, attributed sign-off | ● | — | ◐ | — |
| Findings, punch list and NCRs on the same record | ● | — | ◐ | ◐ |
| Workpacks issued by revision and priced from the survey | ● | — | — | — |
| Coating standards named and built inGauge makers name measurement standards; integrity tools name API codes | ● | ◐ | — | — |
| A full shift captured with no signalVaries by product | ● | ◐ | ◐ | ◐ |
covers it partly, or depends on how it's set up not what it's for. Gauge software means the gauge makers' own apps; form apps are general-purpose inspection checklists; integrity platforms are plant and hull inspection-data systems.
Sheet 04Industries · roles
Set up the way your site is organized.
You name the levels of each site, so a hull, a platform, a process unit and a bridge all fit without forcing one into the other's shape.
| Shipbuilding & repair | Newbuild blocks and tanks, drydock repair, yard QC and the owner's rep on one job. |
| Offshore platforms | Decks, modules and splash zones, maintained on long programmes with little signal. |
| Refineries & chemical plants | Maintenance painting by unit, area and line: survey, grade, workpack, QA. |
| Tank farms & terminals | Every tank in the scope on one wall, linings inspected coat by coat. |
| Power, water & infrastructure | Bridges, penstocks, water tanks and structures, organized span by span or unit by unit. |
| Yard QC | Pass stages, raise findings, keep the yard's own record. |
| Owner's representative | Accept or reject at the hold point, write NCRs, report to the owner. |
| Painting contractor | See the workpack, the punch list and what's waiting on the crew. |
| Facility coatings coordinator | Run the maintenance painting programme from survey to sign-off. |
| Independent inspector | Carry your own licence and your own records from job to job. |
Sheet 05On record
See the paperwork before you see the pitch.
These are real reports the app printed from the demonstration records. Read them the way your customer would.
Sample Standard reportPreview · PDF · 6 pages · demo data
Sample Production reportPreview · PDF · 18 pages · demo data
Samples, not real inspection records: the app printed them from Northern Reach, a fictional demonstration platform. The demonstration copy has no specification loaded, so these pages say "no specification governed this record" where a live job prints the spec's own figures beside each reading.
| Field inspections | 1,637 |
| Photos on record | 7,134 |
| Gauge readings | 4,140 |
| Coated area tracked | 25,144 ft² |
| Hold-point gates | 315 |
| Findings tracked | 271 |
Live production figures, October 2026. Demo and training data excluded.
Sheet 06Contact
The inspector behind it
Built by an inspector, for inspectors.
Robert W. Finsel is a NACE CIP Level II coatings inspector with more than 30 years in industrial coatings. Every screen came out of real survey and QA/QC work, onshore and offshore. More about Robert and the company.
See it on your own steel.
Robert will walk your QC team through a complete record, from blast to acceptance. Bring a spec and a question.
LicencePer facility, or per inspector
LaborNone bundled
Your dataKept apart per company
PlatformsWeb, iPad, iPhone
Phone(706) 925-7007
CompanyBlackstone Lane LLC